Heat pumps in Draper fail differently than a furnace or straight AC — a stuck reversing valve, an incomplete defrost cycle, or auxiliary heat that won't kick in all need specific diagnostic steps. Our techs train specifically on these systems, not just general repair.
General HVAC techs are often less confident with heat pumps since the reversing valve, defrost board, and aux heat strips don't exist on a standard split system. A winter symptom and a summer symptom get tested separately.
Specialized knowledge for specialized equipment.
Catching what often gets misdiagnosed as a compressor failure.
Whether defrost won't start or won't stop, we test the board and sensors.
We test the physical heating elements and the control logic that decides when to fire them, since a fault in either one produces the exact same symptom.
We don't treat heat pump calls as a summer specialty and go quiet the rest of the year.
Different brands handle defrost logic differently, and our techs train on the specific systems common in Draper, UT.
Six repairs specific to heat pump equipment.
Tested directly, not assumed.
We test the defrost control.
Verified directly.
We verify in both heating and cooling mode.
The outdoor coil takes more weather exposure than an indoor coil ever sees.
Heat pump staging is different from a standard furnace setup during service.
What to expect.
Tell us the symptom and which mode it's happening in.
Not general tools alone.
Testing covers heating and cooling.
We verify the fix in both modes before considering the job done.
Feedback from recent heat pump service calls.
Retired to a converted schoolhouse with a heat pump system nobody local seemed to understand. This crew actually knew the manufacturer's defrost logic inside and out.
— D. Featheringham, retiree
Home art studio needs stable temperature for resin work, and the heat pump kept short-cycling in shoulder season. They found the staging issue that three other visits missed.
— K. Olusegun, resin artist
Off-grid cabin with a heat pump paired to solar, previous techs kept treating it like a standard grid-tied system. This one actually understood the setup.
— J. Thibedeaux, off-grid homeowner
Rental duplex tenant kept complaining about cold air in heat mode, turned out to be a genuinely stuck reversing valve that got fixed in one visit.
— M. Osunkoya, landlord
Common questions before a Heat Pump Repair visit.
We don't assume, we test both possibilities.
A thin layer of frost comes and goes normally; ice that just sits there and builds up means the defrost logic isn't doing its job.
The signal isn't reaching the strips the way it should.
A heat pump tune-up covers ground a standard AC visit never touches, namely the defrost cycle and the reversing valve.
Year-round, both heating and cooling mode failures covered.
Not just the mode it's currently running in.
We train on the specific brands common in Draper, UT.
Not inherently, though the auxiliary heat strips see more use in harsher climates and are worth checking during maintenance.
Regular tune-ups extend that window meaningfully.
Heat pump repair coverage spans Draper and surrounding Draper, UT zips below — call to schedule.
Schedule Service